Our Products

Heavy-duty 33/11kV oil-immersed power transformer built with laser-cut prime CRGO silicon core and 99.9% IACS copper conductor windings. Complete with Buchholz relay, WTI/OTI indicators, and conservator tank.

• Capacity: 2.5 MVA to 20 MVA (ONAN / ONAF cooling)
• Vector Group: Dyn11 / YNd11, 50 Hz, 170 kV BIL
• Option for Off-Circuit (OCTC) or On-Load Tap Changer (OLTC)
• BUET type-tested & certified for Bangladesh utility substations

Direct step-down from 33kV primary down to 415V industrial utilization, eliminating intermediate 11kV equipment stages to drastically optimize substation footprints and capital expenditure.

• Capacity: 1000 kVA to 3150 kVA (3-Phase 4-Wire)
• High energy efficiency with ultra-low no-load core losses
• Corrosion-resistant structural steel tank with cooling fins
• Ideal for composite textiles, pharmaceuticals, and export zones

Hermetically sealed construction completely isolating insulating oil from atmospheric oxygen and moisture. Zero sludge formation and maintenance-free operation across entire lifecycle.

• Capacity: 250 kVA to 2500 kVA (Dyn11)
• High electrical efficiency > 98.8% at full rated load
• Flexible corrugated fin walls accommodating thermal expansion
• Integrated safety detector (RIS/DMCR) for multi-parameter protection

Rugged outdoor conservator transformer built to endure high ambient temperatures, monsoonal weather, and continuous industrial cycling per BREB and BPDB requirements.

• Capacity: 100 kVA to 1600 kVA, 11kV to 415/240V
• Conservator tank with dehydrating silica gel breather
• Dielectric breakdown strength verified above 60 kV
• Suitable for pole-mounted and plinth-mounted industrial substations

Vacuum-cast epoxy resin transformer offering 100% fire-safety, moisture resistance, and self-extinguishing characteristics. Ideal for high-rise commercial buildings and indoor substations.

• Capacity: 250 kVA to 3150 kVA (Up to 33kV)
• Environmental Class E2, Climatic C2, Fire Behavior F1 (IEC 60076-11)
• Partial discharge < 10 pC ensuring extended service life
• Forced-air cross-flow fans offering up to +40% overload capacity

Advanced vacuum pressure impregnation utilizing Class H (180°C) Nomex insulation, providing superior mechanical strength against dynamic short circuits and rapid thermal cycling.

• Capacity: 160 kVA to 2000 kVA (11kV / 0.415kV)
• High thermal endurance withstand up to 180°C
• Open-wound ventilated design with low acoustic noise (<58 dBA)
• Engineered for industrial factory floors and machine centers

Metal-clad compartmentalized 33kV switchgear with withdrawable vacuum circuit breaker truck, 31.5kA breaking capacity, and internal arc classification (IAC AFLR).

• Rated: 1250A – 2500A, 31.5kA 3s
• BIL: 170 kV Peak, Form 4b segregation
• Numerical relays (Schneider / ABB / Siemens)

Type-tested 11kV metal-clad indoor switchgear panel with automatic safety shutters, 30,000 operations vacuum interrupters, and rapid earthing switch.

• Rated: 630A – 2000A, 25kA / 31.5kA
• Impulse BIL: 75 kV, IP4X protection
• Epoxy busbars & capacitive live indicators

Modular low voltage MCC panel with withdrawable starter drawers, soft starters, and VFD integration for centralized factory motor management.

• Busbar Rating: Up to 4000A, 65kA 1s
• DOL, Star-Delta, Soft Starter, and VFD
• Smart motor protection relays with Modbus

Powered by genuine turbocharged Cummins diesel engine paired with Stamford brushless alternator. Complete with soundproof acoustic canopy (72 dBA @ 7m) and Deep Sea DSE7320 AMF controller.

• Prime: 450 kVA / 360 kW | Standby: 500 kVA / 400 kW
• Weatherproof soundproof canopy per DoE Bangladesh standards
• Integrated 8-hour base fuel tank with mechanical gauge
• 24/7 on-site technical support and genuine spare parts

Heavy-duty 1000 kVA generator powered by Perkins 4008 series engine delivering exceptional transient step-load acceptance for 24/7 mission-critical steel, cement, and spinning mills.

• Prime: 900 kVA / 720 kW | Standby: 1000 kVA / 800 kW
• Leroy Somer / Stamford alternator with digital AVR
• Multi-generator auto-synchronization & load sharing controller
• Dual electric starter motors with dual heavy-duty battery banks

144 half-cut monocrystalline cells with multi-busbar technology generating up to 25% additional yield from rear-side roof reflection for industrial Net Metering installations.

• Nominal Power: 550W | Module Efficiency: 21.3%
• Bifaciality Factor: 70% ± 5% (Higher kWh/kWp yield)
• 3.2mm tempered anti-reflective glass & 35mm anodized frame
• 12-year product warranty & 30-year 84.8% performance warranty

Next-generation N-Type TOPCon solar module featuring 22.3% conversion efficiency and an ultra-low temperature coefficient (-0.30%/°C) delivering maximum energy yield in hot tropical weather.

• Nominal Power: 600W | Module Efficiency: 22.3%
• Ultra-low degradation (<1% year 1, <0.4% annual)
• Zero Light-Induced Degradation (LID) & PID-free certified
• Ideal for LEED Platinum certified green textile factories

Custom modular switchboard with motorized drawout Air Circuit Breaker (ACB) incomers, 99.9% electrolytic copper busbars, and RS-485 Modbus telemetry.

• Rated: 800A to 4000A, 85kA 1s
• Electro-galvanized sheet steel with powder coat
• Integrated Type 1+2 Surge Protection (SPD)

Reactive power compensation panel maintaining system PF > 0.98. Equipped with 7% detuned harmonic filter reactors preventing resonance.

• Capacity: 100 kVAR to 1200 kVAR
• Gas-filled self-healing capacitors
• Prevents low power factor utility surcharges

Floor-by-floor branch power distribution with high-rupturing MCCB incomers, 10kA branch MCBs, and automatic phase selector ensuring continuous lighting and power.

• Incomer: 63A to 400A MCCB
• 12 to 48 Ways branch configurations
• 30mA / 300mA residual current protection

Vacuum-degassed cycloaliphatic epoxy resin CT providing high dielectric withstand, partial discharge resistance, and dual/triple core configurations for simultaneous metering and protection.

• Voltage: 12 kV / 36 kV | Primary: 50A to 2000A, Secondary: 5A or 1A
• Metering Accuracy: Class 0.2, 0.2S, 0.5
• Protection Accuracy: Class 5P10, 5P20, PS (Differential)
• BIL: 75 kV (11kV) / 170 kV (33kV)

Resin cast potential transformer engineered for high-accuracy utility revenue metering, directional relay protection, and synchronizing circuits with built-in primary fuse protection.

• Ratio: 11kV/√3 : 110V/√3 or 33kV/√3 : 110V/√3
• Dual secondary: Metering (0.2/0.5) & Broken Delta (3P)
• Partial discharge < 5 pC ensuring long-term insulation integrity
• Compliant with IEC 61869-3 standards